Αναζήτηση
Αποτελέσματα 1-10 από 19
Effect of novel paint removal processes on the fatigue behavior of aluminum alloy 2024
(1998)
Conventional paint removal processes, based on application of chemicals and abrasion, are becoming inadequate for modern aircraft structures. In addition they are associated with severe environmental problems, mainly due ...
Hydrogen absorption into aluminum alloy 2024-T3 during exfoliation and alternate immersion testing
(1998)
Exfoliation and alternate immersion corrosion were investigated in Al alloy 2024-T3 (UNS A92024) uptake during exposure and to correlate it with corrosion characterization. Characterization involved determination of weight ...
THERMODYNAMICS-BASED ALLOY DESIGN CRITERIA FOR AUSTENITE STABILIZATION AND TRANSFORMATION TOUGHENING IN THE FE-NI-CO SYSTEM
(1995)
Transformation toughening has been widely applied in metastable austenitic steels. Recently this toughening mechanism has been extended to ultrahigh strength secondary-hardening martensitic steels, bearing suitable austenitic ...
Growth of TiB2 and TiC coatings using pulsed laser deposition
(1997)
Refractory coatings of TiC and TiB2 have been grown by pulsed laser deposition on Si(100) and on X155 steel at various substrate temperatures ranging from 40 degrees C-650 degrees C. A pulsed KrF excimer laser was used ...
Experimental determination of the stability of retained austenite in low alloy TRIP steels
(1999)
The stability of retained austenite is the most important parameter controlling the transformation plasticity effects in multiphase low alloy TRIP steels. In this work the thermodynamic stability of the retained austenite ...
Thermodynamic analysis and mechanical properties of cost aluminum alloy A357 with Cu, Ag and Sm additions
(1996)
Computational thermodynamics has been conducted on the aluminum alloy A357 with additions of Cu, Ag and Sm. The analysis included the determination of isopleth sections and phase fractions as a function of temperature, ...
Thermodynamic analysis and mechanical properties of cast aluminum alloy A357 with Cu, Ag and Sm additions
(1996)
Computational thermodynamics has been conducted on the aluminum alloy A357 with additions of Cu, Ag and Sm. The analysis included the determination of isopleth sections and phase fractions as a function of temperature. ...
Nanocrystalline growth and diagnostics of TiC and TiB2 hard coatings by pulsed laser deposition
(1999)
Nanocrystalline coatings of TiC and TiB2 were grown by pulsed laser deposition on Si(100) and on X155 steel at low substrate temperatures ranging from 40 degrees C to 650 degrees C. A pulsed KrF excimer laser was used with ...
On the nanocrystalline structure of TiC and TiB2 produced by laser ablation
(1997)
Thin films of TiC and TiB2 have been deposited on silicon substrate by pulsed laser deposition technique, under substrate temperatures 25 - 600 degrees C. Transmission electron microscopy revealed the nanocrystalline ...