Investigation of the seismic performance of a single story – Single bay special truss moment frame with SMAs incorporated
Data
2021Language
en
Soggetto
Abstract
The present work deals with the improvement of the seismic performance of a Single Story-Single Bay Special Truss Moment Frame (STMF) by incorporating Shape Memory Alloys (SMAs) as dissipation devices in the special segment, which can recover their initial geometry after mechanical distortion by unloading through the phase transformation (martensitic-austenitic phase). STMFs were initially designed with a special segment located in the middle of the truss to dissipate the input energy through the formation of plastic hinges at the four corners of the chord members. This mechanism is replaced with the input energy dissipation through the SMA deformation in a pin-ended special segment. In what follows, the frame at hand is examined incorporating SMA bars per diagonal of either 0.025 m or 0.035 m in diameter, restrained against buckling, simulated via a 4-DOF mechanical model consisting of two lumped masses, under selected ground motions. To further evaluate the performance of the frame with SMAs incorporated and at the same time verify the model, a non-linear dynamic time-history analysis is conducted using SeismoStruct Finite Element software. The response of the proposed system is compared with the one of the conventional one. Results show that the proposed system leads to a decrease of the maximum displacement and potentially allows a much lighter construction. © 2021 Institution of Structural Engineers