Mostra i principali dati dell'item

dc.creatorKeil B.D., Lucier G., Karamanos S.A., Mielke R.D., Gobler F., Fappas D., Sarvanis G.C., Chatzopoulou G., Card R.J.en
dc.date.accessioned2023-01-31T08:43:09Z
dc.date.available2023-01-31T08:43:09Z
dc.date.issued2020
dc.identifier10.1061/9780784483213.028
dc.identifier.isbn9780784483213
dc.identifier.urihttp://hdl.handle.net/11615/74820
dc.description.abstractWelded lap joints are commonly used in large-diameter steel pipelines for water transmission. Their structural performance constitutes a key consideration for safeguarding pipeline integrity with no loss of pressure containment, required after a severe seismic or geohazard event. Full-scale experiments are presented, which are part of an extensive ongoing project related to structural performance of welded lap joints under severe ground-induced (seismic) actions. The paper describes a series of large-scale physical experiments on 24-in. diameter steel pipes with welded lap joints subjected to axial compression and tension. The axial loading experiments under consideration complement the series of large-scale bending tests performed in 2017, and presented in the ASCE 2018 Pipelines Conference (paper entitled: "Experimental Results of Steel Lap Welded Joints in Seismic Conditions", authored by Keil et al.). The specimens tested under axial loading are first pressurized to 40% of yield pressure, and subsequently subjected to large amount of compression or tension. Measurements of the axial load, characteristic displacements, and local strains at the joint area have been obtained. All specimens exhibited the capability of sustaining high axial loads with significant axial deformation, without loss of pressure containment. In support of the above experiments, advanced finite element models have also been developed, for the purpose of simulating the experiments and elucidating some pertinent topics on the structural response of welded lap joint behavior. The results of the present study demonstrate the remarkable strength and deformation capacity of lap welded joints under consideration, supporting the argument that those joints can be used in steel pipelines crossing seismic and geohazard areas, where severe and permanent ground-induced actions are expected. © 2020 American Society of Civil Engineers.en
dc.language.isoenen
dc.sourcePipelines 2020: Utility Engineering, Surveying, and Multidisciplinary Topics - Proceedings of Sessions of the Pipelines 2020 Conferenceen
dc.source.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-85094647284&doi=10.1061%2f9780784483213.028&partnerID=40&md5=315178233d17b1dfe7e808118ccd87ea
dc.subjectAxial loadsen
dc.subjectBending testsen
dc.subjectDeformationen
dc.subjectHazardsen
dc.subjectSeismologyen
dc.subjectSteel pipeen
dc.subjectSurveysen
dc.subjectWelded steel structuresen
dc.subjectWeldingen
dc.subjectWeldsen
dc.subjectCompression and tensionen
dc.subjectDeformation capacityen
dc.subjectExperimental investigationsen
dc.subjectFull-scale experimenten
dc.subjectPhysical experimentsen
dc.subjectPipeline integrityen
dc.subjectStructural performanceen
dc.subjectStructural responseen
dc.subjectPipelinesen
dc.subjectAmerican Society of Civil Engineers (ASCE)en
dc.titleExperimental Investigation of Steel Lap Welded Pipe Joint Performance under Severe Axial Loading Conditions in Seismic or Geohazard Areasen
dc.typeconferenceItemen


Files in questo item

FilesDimensioneFormatoMostra

Nessun files in questo item.

Questo item appare nelle seguenti collezioni

Mostra i principali dati dell'item