Mostra i principali dati dell'item
Surface Roughness Optimization of Poly-Jet 3D Printing Using Grey Taguchi Method
dc.creator | Aslani K.-E., Vakouftsi F., Kechagias J.D., Mastorakis N.E. | en |
dc.date.accessioned | 2023-01-31T07:33:35Z | |
dc.date.available | 2023-01-31T07:33:35Z | |
dc.date.issued | 2019 | |
dc.identifier | 10.1109/ICCAIRO47923.2019.00041 | |
dc.identifier.isbn | 9781728135724 | |
dc.identifier.uri | http://hdl.handle.net/11615/70867 | |
dc.description.abstract | In the current study, the surface finish of specimens fabricated with PolyJet 3D Printing Direct process is discussed. Three surface roughness indicators were measured at three positions, while three process parameters namely layer thickness, build style and scale were examined. An L4 orthogonal array was employed for the design of experiments. Grey-Taguchi method was applied in order to optimize all surface roughness parameters. The effect of each parameter has been investigated using ANOM (Analysis of Means), while ANOVA (Analysis of Variances) has been performed to identify each parameter importance onto the surface texture. Additionally, the findings of this study were compared with the results of a similar optimization study conducted before, using the usual Taguchi method. It was concluded that 16 μm of layer thickness and glossy style provide the optimum surface roughness results, while built style is the most dominant factor. All the results of the Grey Taguchi method are compatible with the ones of the usual Taguchi method. © 2019 IEEE. | en |
dc.language.iso | en | en |
dc.source | Proceedings - 2019 3rd International Conference on Control, Artificial Intelligence, Robotics and Optimization, ICCAIRO 2019 | en |
dc.source.uri | https://www.scopus.com/inward/record.uri?eid=2-s2.0-85083652789&doi=10.1109%2fICCAIRO47923.2019.00041&partnerID=40&md5=1a946338ff5e4a6454e361a169988ea1 | |
dc.subject | 3D printers | en |
dc.subject | Agricultural robots | en |
dc.subject | Design of experiments | en |
dc.subject | Robotics | en |
dc.subject | Taguchi methods | en |
dc.subject | Textures | en |
dc.subject | Analysis of means | en |
dc.subject | Dominant factor | en |
dc.subject | Optimization studies | en |
dc.subject | Orthogonal array | en |
dc.subject | Process parameters | en |
dc.subject | Surface finishes | en |
dc.subject | Surface roughness parameters | en |
dc.subject | Surface textures | en |
dc.subject | Surface roughness | en |
dc.subject | Institute of Electrical and Electronics Engineers Inc. | en |
dc.title | Surface Roughness Optimization of Poly-Jet 3D Printing Using Grey Taguchi Method | en |
dc.type | conferenceItem | en |
Files in questo item
Files | Dimensione | Formato | Mostra |
---|---|---|---|
Nessun files in questo item. |