Parcourir par sujet "Yield stress"
Voici les éléments 1-7 de 7
-
Fatigue of materials - Influence of microstructure and processing effect of overaging on fatigue crack propagation of 2024 T3 aluminum alloy
(2013)The effect of controlled overaging on fatigue crack propagation (Stage II) in 2024-T3 aluminum alloy was experimentally investigated. Overaging was performed by subjecting the material from initial T3 state to appropriate ... -
Local buckling and deformation capacity of tubes in steel structures
(2008)In this paper, the focus is on local buckling limits after yielding of the cross section (plastic buckling). This is in contrast to thin cylindrical shells, where local buckling occurs at stresses below the yield stress ... -
Local buckling strength and deformation capacity of pipes
(2009)Local buckling in cylindrical shells may occur elastically or plastically, mainly depending on the diameter to wall thickness ratio. In offshore structures plastic local buckling is mostly the governing criterion. In thin ... -
Numerical Simulation of Damage on Cementitious Sprayed Fire-Resistive Materials Applied on Steel Plates
(2019)Cementitious Sprayed Fire Resistive Materials (SFRMs) are extensively employed for the fire protection of steel structural members due to their cost-effective fire proofing capabilities. They are susceptible, however, to ... -
Parameter effects and process modelling of Polyamide 12 3D-printed parts strength and toughness
(2022)Polyamide 12 (PA12) is a high-performance polymeric material adopted by various industries for its thermal, electrical, and mechanical properties. In this work, a comprehensive examination of the impact of three 3D printing ... -
Prediction of crack growth following a single overload in aluminum alloy with sheet and plate microstructure
(2011)The fatigue crack growth behavior under constant amplitude and under single overload of 2024 aluminum alloy in sheet and plate product form has been investigated. Constant amplitude fatigue crack growth tests showed superior ... -
Seismic retrofitting of steel and concrete structures using low-yield strength shear panels
(2005)The paper addresses the problem of seismic retrofitting of existing concrete structures through an innovative methodology based on low yield strength metal shear panels. These panels are introduced in specific places of ...