Πλοήγηση ανά Θέμα "Drops"
Αποτελέσματα 1-8 από 8
-
Characterization of the worst-case current waveform excitations in general RLC-model power grid analysis
(2010)Validating the robustness of power distribution in modem IC design is a crucial but very difficult problem, due to the vast number of possible working modes and the high, operating frequencies which necessitate the modeling ... -
A design flow for the precise identification of the worst-case voltage drop in power grid analyses
(2008)Modern IC designs contain hundreds of millions of transistors and new implementations of multi core chips take place in commercial products. Identifying worst-case voltage drop conditions in every hierarchical module ... -
The effect of anode bed geometry on the hydraulic behaviour of PEM fuel cells
(2016)The influence of the anode bed geometry on the hydraulic behaviour of PEM fuel cells is assessed. Three basic geometrical patterns are studied, namely the interdigitated, the parallel and the serpentine ones, in their ... -
Filtration efficiency and pressure drop modelling of particulate filters with rear plug damage
(2021)A model suitable for wall-flow particulate filters with partial rear plug damage is developed and experimentally validated in this work. A ceramic filter with 16% of the rear plugs mechanically removed is tested at ... -
A power grid analysis and verification tool based on a statistical prediction engine
(2010)Voltage drops are one of the most stringent problems in modern IC implementation, which is exacerbated by the ever decreasing transistor sizes and interconnect line widths. In order to find the true worst case voltage drop ... -
Power, performance and area prediction of 3D ICs during early stage design exploration in 45nm
(2011)In this work, the impact of across-chip temperature and power supply voltage variations, on performance predictions in 3D ICs, is investigated. To make this possible, a novel design flow is proposed to perform design ... -
Precise identification of the worst-case voltage drop conditions in power grid verification
(2006)Identifying worst-case voltage drop conditions in every module supplied by the power grid is a crucial problem in modern IC design. In this paper we develop a novel methodology for power grid verification which is based ... -
Static arrangement of a capillary porous system (CPS): Modelling
(2017)The static arrangement is studied of a thin CPS wafer which is filled from below with a liquid metal. The CPS is modelled as a thin cylindrical disk that is resting on a flat wall. It is in contact with a reservoir that ...