Sfoglia per Soggetto "Ductility"
Items 1-8 di 8
-
Corrosion-induced hydrogen embrittlement in aluminum alloy 2024
(2005)Corrosion is a major concern to the structural integrity of aging aircraft structures. The effect of corrosion on the damage tolerance ability of advanced aluminum alloys calls for consideration of the problems associated ... -
Elephant's foot buckling and imperfection sensitivity of internally pressurized thin-walled metal cylinders subjected to bending
(2016)Upright cylindrical steel storage tanks, subjected to lateral loading, may fail in the form of local buckling near their bottom, due to the simultaneous action of excessive axial compression in the presence of internal ... -
Experimental and numerical investigation of the bending capacity of spiral-welded steel tubes
(2016)To investigate the structural behaviour of large-diameter spiral-welded steel tubes under bending, a full scale experimental program has been performed, consisting of thirteen 42-inch diameter, spiral-welded steel tubes ... -
EXPERIMENTAL RESEARCH ON IMPROVEMENT OF THE DUCTILITY OF R/C SEISMIC WALLS THROUGH SLIP PREVENTION WITH THE USE OF STEEL RHS
(2022)Several researchers propose placing diagonal reinforcing bars at the base of the wall to treat the shear slip, while others have suggested various ways to address this problem associated with halting the effects incurred ... -
Parameters affecting response and design of steel moment frame reduced beam section connections: An overview
(2011)The most crucial parameters that affect the response as well as the design of Steel Moment Frame (SMF) Reduced Beam Section (RBS) connections are discussed. After a brief historical background concerning the development ... -
Response of RC Frames Strengthened by RC Infill Walls: Experimental Study
(2019)The experimental results of a research program on the response of 1/3-scale reinforced concrete infilled frames are presented and evaluated. The main objective was to assess the seismic performance of RC frames infilled ... -
Retained austenite and mechanical properties in bainite transformed low alloy steels
(1995)Uniform ductility and formability of low alloy steels can be improved by the transformation plasticity effect of metastable retained austenite. In this work, intercritical annealing followed by bainite transformation ... -
Strain-Based design procedures for spiral-welded steel tubes in combined walls
(2016)Spiral-welded steel tubes with diameter to wall thickness ratios between 60 and 140 are often employed in combined wall systems with local buckling as governing failure mode. The current design rules in Eurocode 3 (EN ...