Reduction in Blockage Property of UV-Blocking Greenhouse Covering Material: In Situ and Lab Measurement Comparison

Abstract

The goal of this research was to compare and evaluate the measurements taken by different instruments regarding alterations while varying the ultraviolet (UV)-blocking property of cladding material during its usage under real greenhouse conditions. The UV-blocking covering material, low-density polyethylene (LDPE), is enriched with additives that are scattered in several layers during the manufacturing process, resulting in the reinforcement of its properties mechanically as well as optically. The duration of this study was three years, and the instruments used were: (a) sensors measuring the UV radiation reaching the earth’s surface in its A and B components; and (b) a portable spectroradiometer capable of measuring the transmissivity of a material, only in the UV-A region. Three covering materials were used with different UV radiation transmissivity. The transmittance was measured both in the laboratory (on samples taken from the roof) and in the field (where the greenhouses were located). Equations were defined to describe the variation in UV radiation transmission increase rate as a function of field exposure time. Lastly, it is important to note that the specific UV radiation sensors were extremely accurate. © 2022 by the authors. Licensee MDPI, Basel, Switzerland.